Impec AS selger eller leiger ut Penta Stillas Klasse 5.
PENTA spiralstillas er produsert i sjøvatn bestandig aluminium og kan kombineres med andre typegodkjente stillaser med same grunnkonstruksjon.
PENTA stilas tilfredsstiller dei same krava som stålstillas, men er atskillig lettare. Dette medfører til kortare monteringstid, redusert belastning og vedlikehaldskostnader.
PENTA Spistillas er produsert i Årdal og er …
Impec AS will be present at both ARABAL and the Aluminium Messe Düsseldorf in November and December this year.
At ARABAL you can find Impec together with Sunpower at Stand D10A between the 22nd and the 24th of November.
At the Aluminium Messe in Dusseldorf between the 29th of November until the 1st of December Impec …
A new 3D stub inspection system has been installed by Impec at Alcoa Fjardal smelter with 360° reading. System reads all vital information on anode-hanger assembly such as stub diameter (thimble remains & washout), stub length (elongation or missing stub), toe-in (cowboy effect), yoke dimensions, stem perpendicularity to yoke and bi-metallic clad crack inspection. …
A new 3D butt inspection system has been supplied for EGA in Dubai. System is creating a 3D model of the butts including the yoke and information is transferred to process control department for further use in pot room process optimization. System has been in operation since Q4-2015 and is the first 3D butt analyzing …
Impec as has been selected as supplier for new Stub Straightening Machine, Vision System and Induction Heater for EGA Emal Ph-2 operations. System will inspect divert and straighten all four stubs on the EGA assembly. Project to be completed by Q1 2017.
Impec as has been selected to supply Vision Systems, Induction Heaters and Stub Straightening Machine for the Hydro Aluminium KTP project.
Impec AS bought ALMEQ Norway AS in 2014, and has taken over all products rights ALMEQ Norway AS supplied to the aluminium industry.
Because of this, we will now offer the products listed below, in addition to our current product and service range, which is displayed when choosing the Product drop down menu.
– Potshell straightening …
Impec is in the process of finalizing a delivery of a slot cutting machine to ALBA.
The slot cutting machine is a reliable and flexible system designed for cutting one, two or three anode slots with a depth up to 450mm, with a width down to 8mm.
The machine is designed so that slots can be …
Impec AS was awarded a contract for delivering a large number of pot covers to Nordural in Iceland.
The contract is for 5 years, with a yearly delivery of pot covers.
IMPEC is awarded the contract for new pot hoods for the Qatalum smelter in Qatar. Project to be delivered in Q1-2011
